RPI and Sakis3g

Install Sakis3g and umtskeeper on Raspberry

• Install Sakis3g, ppp and umtskeeper
• Install Sakis3g in folder /umtskeeper

Connect automatically at startup

[[1]]

• Create file /etc/sakis3g.conf

Telenor:

APN="CUSTOM_APN"
CUSTOM_APN="internet.public"
APN_USER="user"
APN_PASS="pass"

Netcom:

APN="CUSTOM_APN"
CUSTOM_APN="vpn.netcom.com"
APN_USER="user"
APN_PASS="pass"

• Create file /etc/init.d/sakis3g

#! /bin/sh
# /etc/init.d/foobar


# The following part always gets executed.
echo "This part always gets executed"


# The following part carries out specific functions depending on arguments.
case "$1" in
 start)
   sudo /umtskeeper/sakis3g connect
   motion
   ;;
 stop)
   sudo /umtskeeper/sakis3g disconnect
   echo "camera is dead"
   ;;
 *)
   echo "Usage: /etc/init.d/sakis3g {start|stop}"
   exit 1
   ;;
esac


exit 0

• Add the following to /etc/rc.local

/etc/init.d/sakis3g start

Reconnect on connection failure

./umtskeeper --sakisoperators "USBINTERFACE='0' OTHER='USBMODEM' USBMODEM='12d1:1446' APN='CUSTOM_APN' CUSTOM_APN='internet.public' APN_USER='user' APN_PASS='pass'" --sakisswitches "--sudo --console" --devicename 'Huawei' --log --monthstart 8 --nat 'no'