Difference between revisions of "RPI and Sakis3g"

From Hobbywiki
Jump to: navigation, search
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
 +
[[Category:Computerguides]]
 
=Install Sakis3g and umtskeeper on Raspberry=
 
=Install Sakis3g and umtskeeper on Raspberry=
 
*Install Sakis3g, ppp and umtskeeper
 
*Install Sakis3g, ppp and umtskeeper
Line 4: Line 5:
  
 
=Connect automatically at startup=
 
=Connect automatically at startup=
 +
[[http://www.instructables.com/id/Raspberry-Pi-as-a-3g-Huawei-E303-wireless-Edima/step2/Download-and-setup-ppp-UMTSKeeper-and-Sakis3g/]]
 
*Create file /etc/sakis3g.conf
 
*Create file /etc/sakis3g.conf
 
Telenor:
 
Telenor:
Line 46: Line 48:
 
*Add the following to /etc/rc.local
 
*Add the following to /etc/rc.local
 
  /etc/init.d/sakis3g start
 
  /etc/init.d/sakis3g start
 +
 +
=Reconnect on connection failure=
 +
./umtskeeper --sakisoperators "USBINTERFACE='0' OTHER='USBMODEM' USBMODEM='12d1:1446' APN='CUSTOM_APN' CUSTOM_APN='internet.public' APN_USER='user' APN_PASS='pass'" --sakisswitches "--sudo --console" --devicename 'Huawei' --log --monthstart 8 --nat 'no'

Latest revision as of 21:25, 1 December 2013

Install Sakis3g and umtskeeper on Raspberry

  • Install Sakis3g, ppp and umtskeeper
  • Install Sakis3g in folder /umtskeeper

Connect automatically at startup

[[1]]

  • Create file /etc/sakis3g.conf

Telenor:

APN="CUSTOM_APN"
CUSTOM_APN="internet.public"
APN_USER="user"
APN_PASS="pass"

Netcom:

APN="CUSTOM_APN"
CUSTOM_APN="vpn.netcom.com"
APN_USER="user"
APN_PASS="pass"
  • Create file /etc/init.d/sakis3g
#! /bin/sh
# /etc/init.d/foobar


# The following part always gets executed.
echo "This part always gets executed"


# The following part carries out specific functions depending on arguments.
case "$1" in
 start)
   sudo /umtskeeper/sakis3g connect
   motion
   ;;
 stop)
   sudo /umtskeeper/sakis3g disconnect
   echo "camera is dead"
   ;;
 *)
   echo "Usage: /etc/init.d/sakis3g {start|stop}"
   exit 1
   ;;
esac


exit 0
  • Add the following to /etc/rc.local
/etc/init.d/sakis3g start

Reconnect on connection failure

./umtskeeper --sakisoperators "USBINTERFACE='0' OTHER='USBMODEM' USBMODEM='12d1:1446' APN='CUSTOM_APN' CUSTOM_APN='internet.public' APN_USER='user' APN_PASS='pass'" --sakisswitches "--sudo --console" --devicename 'Huawei' --log --monthstart 8 --nat 'no'